|
| |
|
DC power
Industrial Grade
Ethernet Switch NS-108 |
12, 24, DC
powered VDC powered Industrial rated 10/100baseT Switch
and also available in VAC power 10BaseT and 100BaseT Ethernet switch
|
NS-108
Industrial Ethernet
Switch |
|
|
jump to
Manual |
|
|
|
Features
 |
Complies with IEEE 802.3
10Base-T, IEEE 802.3u 100Base-TX, and IEEE 802.3x flow control
standards |
|
Provides 5 10/100Mbps
switched ports |
|
Each port supports both
10/100Mbps speed auto-negotiation and auto-sensing |
|
Each port auto detect
MDI/MDI-X (UP-Link/TX) |
|
Full/half duplex operation
for each port |
|
Supports 8K MAC addresses
|
|
Store-and-forward
architecture |
|
Non-blocking switching
|
|
Supports full-duplex flow
control (IEEE 802.3x) |
|
Back-pressure flow control
in half duplex mode |
|
Compact design with small
footprint |
|
Specifications
|
Port configuration
|
Auto-negotiation for
connection speed and duplex type |
|
Connector |
Shielded RJ-45 jack |
|
Cables |
10Base-T Cat.3,4,5
UTP cable(100m max.)
100Base-T Cat.5 UTP
cable(100m max.) |
|
Filtering address |
Unicast/Multicase/Broadcast
address:8K MAC addresses per unit |
|
Filtering rate |
14,880pps for Ethernet,
148,800pps for Fast Ethernet |
|
Forwarding rate |
14,880pps for Ethernet,
148,800pps for Fast Ethernet |
|
RAM Buffers |
2MB |
|
LEDs |
-Power status
-10/100,Link/Activity,
Duplex/Collison status for each port |
|
Environment |
Temperature: 0¢XC to 60¢XC
Relative Humidity : 10%
to 90% non-condensiong |
|
Dimension |
160mm x 70mm x 125mm |
|
Power |
DC10~30V 7W |
|
|
Ordering Information
|
NS-108 |
Industrial Ethernet
Switch |
|
|
jump to
NS-105 5 port DIN
rail mounted DC power Industrial Ethernet Switch
jump to
ANS-115FT 5 port
fiber DC and 230VAC powered Industrial Ethernet Switch
see other
SCADA
data communications products
|